• Sonsuz sayıda alt şablonlar üretebilme
• Video ve animasyon alanlarına çok sayıda dosya ekleyebilme
• Resimler için saydamlık ayarı
• Şablon üzerindeki alanlar için yayına verme sırasında kullanılacak zaman öncelikleri tanımlayabilme
• Görsel kullanım kolaylığı
• Sürükle/bırak metodu ile atamalar
• Gerekli tüm bilgilere aynı ekrandan ulaşma
• Kullanıcı tarafından değiştirilebilen esnek ekran tasarımları
• Çok seviyeli tablolarda gerekli tüm verilerin kullanıcı kontrollu görüntülenmesi
• Şablon üzerinde sadece istenen bileşenlerin yayına verilmesi.
• Şablonlarda sınırsız video, animasyon, resim ve yazı alanı tanımlama
• Still ve float desteği
• Geçiş efekti ayarları
• Bileşen bazında farklı geçiş efektleri
• Çok katmanlı çalışma desteği
• Sonsuz sayıda KJ alt metin desteği
• Mevcut tüm resim ve video formatları desteği
Aksesuar
Teknik özellikler
Supported Video Resolution
• 525 line/29.97fps Active Region 720 x 486
• 625 line/25fps Active Region 720 x 576
Video Inputs
• One Serial Digital Program/Frame Grab input: - 4:2:2 SMPTE 259M-C, 8/10 bit SDI (270 Mbps @ 525/625)
• One Serial Digital Key: - 4:2:2 SMPTE 259M-C, 8/10 bit SDI (270 Mbps @ 525/625)
• One Analog Reference input (Signal type: blackburst or composite video)
Video Outputs
• One Serial Digital Program Output (Fill) - 4:2:2 SMPTE 259M-C, 8/10 bit SDI (270 Mbps @ 525/625)
• One Serial Digital Program Output (Key)- 4:2:2 SMPTE 259M-C, 8/10 bit SDI (270 Mbps @ 525/625)
• One Composite Preview output - VGA card second head composite output (not genlocked – for monitoring purposes only)
System Genlock When system is genlocked to the analog reference input the SDI input timing window is +-2uS.
• In the Pass Through Keying mode system can be genlocked to the SDI input or to the analog reference input.
• In the Downstream Keying mode system can be genlocked to the SDI input or to the analog reference input.